Pagina Calcolo tecnico

Technical calculation toolUser engineering

Type of conveyor

Horizontal

Inclined

Traction

Standard

Central Traction

Bidirectional

Double traction

Push traction

Difficult transferences

Curved 90º

Curved 180º

S-curved

Oval

Spiral

Standard

Swan neck

In 'L'

In 'Z'

Belt

Series

Surface

Belt Material

Rod Material

Conveyor properties

Length between shafts

Width

Load

Speed

There is abrasion

The belt slides on

Humidity

Belt friction coefficient

Belt temperature from to

Daily working time

Loaded starts

Not recommended to use these belt and support surface materials for this application, please, insert friction coefficient

Shafts and gears

Shaft material

Width

Drive journal

Teeth number of drive sprockets

Drive sprockets hole

Central support for the drive shaft

Teeth number of idle sprockets

Idle sprockets hole

Central support for the idle shaft

Motor properties

Engine Type

Traction Type

Rotation Type

Product characteristics

Product type

Product temperature

Humidity

Product friction coefficient

Is there accumulated product?

Results

BELT CALCULATION:

Belt weight: 0 kg/m²
Belt lenght expansion: 0 mm
Belt width expansion: 0 mm
Allowable belt strength: 0 kg/m
Belt pull: 0 kg/m
Adjusted belt pull: 0 kg/m
Percentage of allowable: 0 %

SPROCKETS:

Sprocket type in drive shaft: T=0 Ø=0mm □=0mm
Minimum number of sprockets in drive shaft: 0
Sprocket type in idle shaft: T=0 Ø=0mm □=0mm
Minimum number of sprockets in idle shaft: 0

CALCULATIONS FOR DRIVE SHAFTS:

Power required* : 0 W
Shaft torque: 0 Nm
Shaft material: -
Drive shaft journal diameter: 0 mm
Drive shaft load: 0 kg
Drive shaft deflection: 0 mm
Number of middle bearings on drive shaft: 0 units
Idle shaft deflection: 0 mm
Number of middle bearing on idle shaft: 0 units

* This information is only a reference, it does not consider all factors involved, Eurobelt recommend to ask your power transmission supplier

Ask for a quotation